---
title: "UC300 IoT Controller"
canonical: "https://help.scopious.co.nz/space/KB/712605759/UC300%20IoT%20Controller"
format: markdown
---
Milesight UC300 Multiple I/O interface, RS232, RS485 LoRaWAN IoT Controller Store Link Supported Commands (7) Name Description Version Requirements DI/DO Debounce Time Set the debounce time for one of the digital input or output ports. Toggle Data Retransmission Enable/Disable data retransmission on network outtage Reboot Reboot the device Set Reporting Interval Change the rate at which the device uplinks data Set Data Retransmission Delay Set the delay after a network reconnect to resend data. For this setting to take effect, both data storage and data retransmission must be enabled. Set Digital Output State Set a digital output relay on or off. When on, COM will be connected to the NO terminal. When off, COM will be connected to the NC terminal. DO Duration Control Temporarily turn on or off a digital output