---
title: "CT101 Smart Current Transformer"
canonical: "https://help.scopious.co.nz/space/KB/712605706/CT101+Smart+Current+Transformer"
format: markdown
---
![image]()

Milesight LoRaWAN Smart Current Transformer CT101 With 100A Current Capacity

---

[Store Link](https://www.gowifi.co.nz/milesight-iot/ct101-915m.html)

## Supported Commands (6)

| **Name** | **Description** | **Version Requirements** |
| --- | --- | --- |
| **Clear Accumulated Current** | Reset the Total Current to zero. |  |
| **Configure power factor** | Configure the power factor used to calculate energy consumption. Enter the power factor multiplied by 100. For example, 75 for 0.75. | - *Hardware: 2+, Firmware: 1.2 (HW v2)+*
- *Hardware: 2+, Firmware: 1.4 (HW v2)+*
- *Hardware: 2+, Firmware: 1.3 (HW v2)+* |
| **Set Reporting Interval** | Change the rate at which the device uplinks data |  |
| **Configure cumulative data type** | Configure the type of cumulative data reported by the device (Cumulative Ah or Cumulative Kwh) | - *Hardware: 2+, Firmware: 1.2 (HW v2)+*
- *Hardware: 2+, Firmware: 1.4 (HW v2)+*
- *Hardware: 2+, Firmware: 1.3 (HW v2)+* |
| **Reboot** | Reboot the device |  |
| **Configure line voltage** | Configure the line voltage used to calculate energy consumption. Enter the voltage multiplied by 100. For example, 23000 for 230V. | - *Hardware: 2+, Firmware: 1.2 (HW v2)+*
- *Hardware: 2+, Firmware: 1.4 (HW v2)+*
- *Hardware: 2+, Firmware: 1.3 (HW v2)+* |