---
title: "EM410-RDL Radar Distance Sensor"
canonical: "https://help.scopious.co.nz/space/KB/712081466/EM410-RDL%20Radar%20Distance%20Sensor"
format: markdown
---
Milesight LoRaWAN Smart Radar Distance and Level Detection Sensor Store Link Supported Commands (9) Name Description Version Requirements Reboot Reboot the device Set Measurement Range Change Measurement Range Set Scenario Mode Change Scenario Mode Set Radar Algorthm Threshold Sensitivity Set the threshold sensitivity for the distance algorithm. Values can be between 0.1 and 1. They should be entered as the value multiplied by ten. I.E. you should enter 2 instead of 0.2. Set Disable on Tilt Enable/Disable Tilt switch Set Distance Offset Apply a static offset to the radar distance readings. Set Radar Peak Sorting Algorithm Set the algorithm that the device uses to find distances. Set Radar Echo Signal Quality Set the strength of the radar output. A higher value will return more accurate measurements but consume more battery. Set Reporting Interval Change the rate at which the device uplinks data